CO2 Hydroboration: Impact of the Boryl Moieties on the Reactivity of Four Bis(boryl)acetal Compounds toward 2,6-Diisopropylaniline

The hydroboration of CO₂ into bis(boryl)acetal (BBA) compounds is an important transformation, since it enabled to selectively reduce CO₂ by 4e^- and to subsequently use the BBA compounds as C₁ and C_n sources. However, the influence of the nature of the boryl moieties on the reactivity of BBA compounds has not been evaluated so far. In the present study, four BBA compounds – including two new ones – were reacted with 2,6-diisopropylaniline to afford the expected imine. Significant differences in the rate of the reaction from minutes to weeks have been observed depending on the BBA used, showing the importance of the nature of the boryl moieties. Theoretical investigations enabled to propose a mechanism involving the addition of the aniline to the BBA as the rate-determining step and to determine that the steric hindrance of the BBA compounds is the main factor driving the rate of this condensation reaction.     

Controllable Preparation of Branched Polyolefins with Various Microstructural Units via Chain-walking Ethylene and Pentene Polymerizations

Chinese Journal of Polymer Science - Branched polyolefins with controllable topology structures were generated from the chain-walking (co)polymerizations of ethylene, 1-pentene (1P) and 2-pentene...     

Interaction of Hydrogen with Ceria: Hydroxylation,Reduction, and Hydride Formation on the Surface and in the Bulk

The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO₂) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO₂(111) thin films and CeO₂ powders, and theoretical calculations of CeO₂(111) surfaces with oxygen vacancies (O_v) at the surface and in the bulk. We show that, on a stoichiometric CeO₂(111) surface, H₂ dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO_2−x samples, both films and powders, hydroxyls and hydrides (Ce−H) are formed on the surface as well as in the bulk, accompanied by the Ce³⁺ ↔ Ce⁴⁺ redox reaction. As the O_v concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H₂/CeO₂ interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.     

EAST上由垂直不稳定性引发破裂的分析与预测

从EAST 装置2016 年的放电实验中，选取了119 次等离子体破裂放电数据，分析诱发等离子体破裂的原因，发现约60%的破裂是由垂直不稳定性直接引起的，其破裂后将会产生更大的晕电流，从而产生更大的电磁应力损坏装置。对由垂直不稳定性引起的破裂(简称为VID)(72 次放电)进行了研究，建立了分别基于单变量(垂直位移)和两维变量(垂直位移、垂直位移增长率)的预测模型用于对VID 破裂的预测。离线测试表明，基于两维变量的预测模型可以在破裂发生前20ms 给出破裂预警信号，预测成功率达93%。     

灵芝酸A对人肝癌细胞的辐射增敏效应的初步研究

本研究旨在初步探讨灵芝酸A(GAA)对人肝癌细胞系HepG2在高LET中子和低LET的γ射线条件下的辐射敏感性的影响及差异。研究中,我们用CCK-8方法检测不同浓度GAA对HepG2增殖抑制作用。选取低浓度(5μmol/L)GAA预处理细胞24 h,分别给予不同剂量的中子辐照或γ射线辐照,分别检测克隆存活率、细胞凋亡和γH2AX蛋白的foci的形成。结果表明:在不加GAA的情况下,高LET中子辐射比低LET的γ射线对细胞产生的凋亡比例高;在添加了GAA后,与未加GAA对照组相比,诱导细胞凋亡的比例明显增加;另外,加GAA处理后,细胞增殖抑制率也随着辐照剂量的增加而增高。即GAA能增加HepG2细胞的辐射敏感性,而在同样GAA剂量下,HepG2细胞对高LET中子辐射比低LET的γ射线更敏感。由此,这项研究说明灵芝酸或可开发成为一种天然辐射增敏剂,从而为癌症特别是肝癌的放疗提供新的辅助治疗方法。     

The “Fingerprint” of a freshwater microalga Scenedesmus sp. LX1: Visualizing the composition of its soluble algal products

The composition of soluble algal products was visualized by a fingerprint analytical method.     

Recent Progress on Infrared Photoacoustic Spectroscopy Techniques

Abstract

Analogous to most new methods in science, photoacoustic spectroscopy (PAS) grew out of an advance in technology, in this case the dramatic improvement in novel light sources, modulators, and acoustic detectors, as well as signal recovery electronics, which in turn was made possible by the development of modern PAS techniques. PAS is a promising technique that can be used to analyze and characterize a broad variety of objects (gaseous, solid, and liquid samples). In the present review, the recent development of infrared PAS limited to the general area of gas-phase analysis techniques since 1990 is summarized, with special emphasis on the development of new or enhanced analytical methodologies based on the use of the photoacoustic (PA) effect to improve the sensitivity of PAS by enhancing signal or reducing noise levels, with regard to PA systems, applications, and conclusions. The applications of these novel PA methods are mainly concerned with molecular spectroscopic, industrial, atmospheric, environmental, chemical and biological, and medical and clinical analysis. New prospects and challenges in various application fields of PAS technique are described.     

Three-dimensional Octameric Assembly of Icosahedral M13 Units in [Au8Ag57(Dppp)4(C6H11S)32Cl2]Cl and its [Au8Ag55(Dppp)4(C6H11S)34][BPh4]2 Derivative

The high-dimensional (that is, three-dimensional (3D)) assembly of nanomaterials is an effective means of improving their properties; however, achieving this assembly at the atomic level remains challenging. Herein, we obtained a novel nanocluster, [Au₈Ag₅₇(Dppp)₄(C₆H₁₁S)₃₂C_l2]Cl (Dppp=1,3-bis(diphenylphosphino)propane) showing a 3D octameric assembly mode involving the kernel penetration of eight complete icosahedral Au@Ag₁₀Au₂ units for the first time. The atomically precise structure was determined by single-crystal X-ray diffraction, and further confirmed by thermogravimetric analysis, X-ray photoelectron spectroscopy, and electrospray ionization mass spectrometry measurements. Furthermore, ligand-induced transformation prompted the conversion of [Au₈Ag₅₇(Dppp)₄(C₆H₁₁S)₃₂Cl₂]Cl, with complete octameric fusion into [Au₈Ag₅₅(Dppp)₄(C₆H₁₁S)₃₄][BPh₄]₂, with incomplete octameric fusion. These observations will hopefully facilitate further research on the assembly of M₁₃ nanobuilding blocks.     

Fixed-time disturbance observer-based robust fault-tolerant tracking control for uncertain quadrotor UAV subject to input delay

Nonlinear Dynamics - This study focuses on the design of a fixed-time disturbance observer-based robust fault-tolerant tracking control scheme for an uncertain quadrotor unmanned aerial vehicle...     

三维有序结构In掺杂TiO_2薄膜的可见光催化活性

采用自组装生长聚苯乙烯胶体模板和溶胶-凝胶法,制备出三维(3D)有序结构In掺杂TiO2(IO-TiO2-In)薄膜可见光催化剂.光催化实验证明,IO-TiO2-In薄膜降解甲醛的可见光活性是TiO2和三维有序结构TiO2(IOTiO2)薄膜的5倍.利用X射线电子衍射(XRD)谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见(UV-Vis)漫反射吸收光谱确定了催化剂的晶相结构、表面微结构和能带结构.结果表明,IO-TiO2-In薄膜具有锐钛矿型三维有序结构,与TiO2相比,增加了比表面积,提高光的利用率;掺入的In离子在薄膜表面形成In2O3和O-In-Clx(x=1,2)物种,既增强可见光的吸收,又有效地促进了光生载流子的分离,提高了光生载流子在固/气界面参加光催化反应的利用率,使催化剂的可见光催化活性显著提高.